Click image to view full size image
FEATURES OF CASTING JAW CRUSHER
1. Simple structure
2. Low noise
3. Little dust
4. Little abrasion
5. High crushing ratio
6. Even particle size
7. Reliable operation
8. Low cost
APPLICATION OF CASTING JAW CRUSHER
The aggregate crusher is suitable for crushing a variety of soft and hard ores and rocks, whose largest compression resistance is under 320MPa. Maximum size of to- be- fed materials must be less than what is required according to the maximum specification of technical parameters, and aggregate crusher is mainly used for secondary and fine crushing of mid hardness ores and rocks in metallurgical industry, mining, chemistry, cement making industry, construction, refractory, pottery, porcelain industry, etc.
OPERATION OF CASTING JAW CRUSHER
(1) Start feeding after checking the machine.
(2) Evenly put the material into the machine, and avoid putting material from the side or feeding too much to avoid over-feeding, sudden load change or blocking.
(3) Stop feeding before stopping machine. Stop motor after all material discharged.
(4) Stop the motor if there is any stagnancy due to the blocking up of material inside the machine.
(5) The other side can be used if one side of fixed jaw plate and movable jaw plate is worn.
(6) Check all fixed parts before starting to use and tighten the part if loose.
TECHNICAL PARAMETERS OF CASTING JAW CRUSHER
http://www.jbscrushercn.com/